Workshop Twin Screw Bench Vise

While doing some shop improvements, I got the idea to create my own DIY vise to use for projects and so forth. After much deliberation and research, and my wish to keep the project budget low, I decided on mostly wood materials with store bought hardware. I purchased a length of 3/4″ threaded rod, some threaded coupler nuts, washers, a 23/32″ tap, a 3/4″ drill bit, and some lengths of steel rod. I milled the necessary parts down, and used the new Lathe (see this post) to make the lead screw “heads” that would take the threaded rod and the handles. I also had to turn the handle ends. I figured while I was on it, I might as well be creative so I carved the Bushwood logo onto the front of the vise.

I’m pleased with the results. I finished it with 2 coats of Tung Oil and 2 coats of Johnson’s Paste Wax.

20140906_131257.jpg20140907_152729.jpgIMG_20140914_154349.jpgIMG_20140914_162608.jpg20140914_125852.jpgIMG_20140914_121020.jpgIMG_20140914_114444.jpg20140907_102000.jpg

Workbench Vise and Mount

IMG_20140119_160147I did a little shopping around, since I needed a workbench machinist’s vise for my workbench – as I plan to start doing some light metalworking (hush hush secret project) in the near future. After looking at Harbor Freight’s poor showing for vise options (mostly due to poor quality), I found a suitable 4.5 inch vise made by Record (Irwin) at Home Depot for a very affordable price. It’s a light duty workbench vise, so it’s not going to be a heavily used item. Once I got it back to the shop, I dreaded drilling holes directly in the bench and permanently mounting it – so I came up with a mount for it so I can clamp it to the work surface without permanently affixing it. I also made a front apron on it so I can use a leg vise I’m planning for in the very near future. The surface of the mount is 3/16″ hardboard over 3/4″ plywood, with a skinny wrap of cherry for edging to make it look nicer on the bench. It should come in handy. I also ended up purchasing a set of magnetic soft jaws at Lowe’s made by Bessey (a popular clamp manufacturer), so I can clamp oddly shaped items.

IMG_20140119_160147.jpgIMG_20140120_164412.jpgIMG_20140120_164422.jpgIMG_20140120_164427.jpgIMG_20140120_165626.jpgIMG_20140120_172932.jpgIMG_20140120_172940.jpgIMG_20140201_134407.jpgIMG_20140201_134418.jpgIMG_20140202_123018.jpgIMG_20140202_123028.jpgIMG_20140202_123041.jpgIMG_20140202_130439.jpg