Helicopter Pad

I had some scraps of wood lying around the shop, some pine and plywood, and figured I’d put it to good use. My son needed another helicopter pad for his wooden helicopter, so I just knocked together a quick little pad for him with a little ramp and building. The ramp was just sanded down using a belt sander. I used a router to make the circular pad. I coated it with some non-toxic varnish oil from tried and true. He likes it.
IMG_4658.JPGIMG_4659.JPG

Mod Stereo Stand

Well, Woody got me started on this whole stereo thing what with the amp and speakers, so I just had to quickly knock together a nifty little set of shelves with the leftover plywood. Nothing fancy, nor even perfect, but it holds the amp just fine, and has a bit of room for more components later. I slapped on two coats of shellac. The best part is the rear cable management in the column in the back. I drilled a series of holes in each of the braces all the way down the back, and it provides a method by which one can route cable from each shelf down the stand and out the back to the wall.
IMG_4647.JPGIMG_4648.JPGIMG_4649.JPGIMG_4654.JPG