Workbench Vise and Mount

IMG_20140119_160147I did a little shopping around, since I needed a workbench machinist’s vise for my workbench – as I plan to start doing some light metalworking (hush hush secret project) in the near future. After looking at Harbor Freight’s poor showing for vise options (mostly due to poor quality), I found a suitable 4.5 inch vise made by Record (Irwin) at Home Depot for a very affordable price. It’s a light duty workbench vise, so it’s not going to be a heavily used item. Once I got it back to the shop, I dreaded drilling holes directly in the bench and permanently mounting it – so I came up with a mount for it so I can clamp it to the work surface without permanently affixing it. I also made a front apron on it so I can use a leg vise I’m planning for in the very near future. The surface of the mount is 3/16″ hardboard over 3/4″ plywood, with a skinny wrap of cherry for edging to make it look nicer on the bench. It should come in handy. I also ended up purchasing a set of magnetic soft jaws at Lowe’s made by Bessey (a popular clamp manufacturer), so I can clamp oddly shaped items.