Workshop Twin Screw Bench Vise

While doing some shop improvements, I got the idea to create my own DIY vise to use for projects and so forth. After much deliberation and research, and my wish to keep the project budget low, I decided on mostly wood materials with store bought hardware. I purchased a length of 3/4″ threaded rod, some threaded coupler nuts, washers, a 23/32″ tap, a 3/4″ drill bit, and some lengths of steel rod. I milled the necessary parts down, and used the new Lathe (see this post) to make the lead screw “heads” that would take the threaded rod and the handles. I also had to turn the handle ends. I figured while I was on it, I might as well be creative so I carved the Bushwood logo onto the front of the vise.

I’m pleased with the results. I finished it with 2 coats of Tung Oil and 2 coats of Johnson’s Paste Wax.

20140906_131257.jpg20140907_152729.jpgIMG_20140914_154349.jpgIMG_20140914_162608.jpg20140914_125852.jpgIMG_20140914_121020.jpgIMG_20140914_114444.jpg20140907_102000.jpg