Mod Stereo Stand

Well, Woody got me started on this whole stereo thing what with the amp and speakers, so I just had to quickly knock together a nifty little set of shelves with the leftover plywood. Nothing fancy, nor even perfect, but it holds the amp just fine, and has a bit of room for more components later. I slapped on two coats of shellac. The best part is the rear cable management in the column in the back. I drilled a series of holes in each of the braces all the way down the back, and it provides a method by which one can route cable from each shelf down the stand and out the back to the wall.
IMG_4647.JPGIMG_4648.JPGIMG_4649.JPGIMG_4654.JPG

Amp6 Basic Portable Enclosure

Woody had enclosed his Amp6 Basic that I soldered for him into a plastic case. After having wood case envy, he asked me if I could make a case for his Amp6 out of wood, that was a bit smaller than mine. So I did. See the pictures for my results. The wood is Anigre and an unidentifed species of wood that I salvaged off a pallet from work. 2 coats of high gloss Tung Oil is the finish.
IMG_4621.JPGIMG_4624.JPGIMG_4632.JPGIMG_4638.JPG